Cisco 3000 - Assembly Overview

1-3
Cisco TelePresence System 3000
OL-14521-01
Chapter 1 Overview
Assembly Overview
Figure 1-1 View of an Assembled Cisco TelePresence System 3000
Assembly Overview
Perform the following steps to install a CTS 3000:
Step 1 Build the display assembly. See Chapter 2, “Building the Display Assembly” for more information.
Step 2 Mount and level the plasma displays. See Chapter 3, “Mounting and Leveling the Plasma Displays” for
more information.
Step 3 Build the lighting assembly. See Chapter 4, “Building the Lighting Assembly” for more information.
Step 4 Build the display shelf assembly. See Chapter 5, “Building the Display Shelf Assembly” for more
information.
Step 5 Build the table assembly, excepting the privacy panels, by completing the following steps:
a. Install the table. See Chapter 6, “Building the Table Assembly” for more information.
b. Install and connect the microphones. See Step 13 in Chapter 6, “Building the Table Assembly” to
install the microphones and Step 8 in Chapter 8, “Routing Power and Signal Cables” to connect the
microphones.
157320
T
e
l
e
P
r
e
s
e
n
c
e
3
D
E
F
6
M
N
O
9
W
X
Y
Z
#
2
A
B
C
5
J
K
L
8
T
U
V
0
O
P
E
R
1
4
G
H
I
7
P
Q
R
S
C
I
S
C
O
I
P
P
H
O
N
E
7
9
7
0