Cisco 3000 - Routing Power and Signal Cables; Parts List

CHAPTER
8-1
Cisco TelePresence System 3000
OL-14521-01
8
Routing Power and Signal Cables
Revised: December 8, 2011, OL-14521-01
Parts List
Caution Do not power on the PDUs and auxiliary control unit until you connect and route all the cables.
Key Part Description Part Number Qty Ctn Notes
1
Power distribution units 74-4787-01 4 1
2
Speaker cable 37-0849-01 3 1
3
8 m DVI-to-VGA + audio cable 37-0848-01 1 1
4
6 m video cable 37-0854-01 1 1
5
3 m (black) Cat6 Ethernet cable 37-0877-01 5 1
6
10 m Cat6 Ethernet cable, blue 37-0901-01 2 1
7
7 m power cord 37-xxxx-xx 1 10 See “Region- and Country-Specific
Equipment” for specific part numbers.
8
3 m Jumper cord 37-0833-01 9 1
9
2 m Jumper cord 37-0852-01 1 1 Used for projector.
10
3 m Video-to-DVI cable 37-0853-01 3 1
11
Cable identification stickers 51-4582-01 3 1
12
Cable ties 51-4536-01 75 1
13
Cable tie holders 51-0609-01 75 1
14
Ferrite Core 36-0244-01 12 1
15
Not used
Projector-to-Auxiliary Control Unit
(DSUB to 8-P MINI DIN) cable
37-0980-01 1 19 Packaged with Auxiliary Control unit
Microphone extension cords Included with
74-4743-xx
3 1 Included in Microphone kit