7-5
Cisco TelePresence System 3000
OL-14521-01
Chapter 7 Assembling the Remaining Cisco TelePresence Elements
Parts List
Note Note that the key numbers restart for each element.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Note The directions left and right refer to the assembly as you face it from the front.
Caution Some system components have metal and plastic edges with hard angles. These edges are exposed until
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
3
Cardboard ruler 700-24321-xx 1 32
(CTS3K-FU
R-MAPLE)
29
(CTS3K-M-
TABLE-G2)
4
Vertical bar 700-23961-xx 2 32
(CTS3K-FU
R-MAPLE)
29
(CTS3K-M-
TABLE-G2)
5
Horizontal bar 700-23960-xx 2 32
(CTS3K-FU
R-MAPLE)
29
(CTS3K-M-
TABLE-G2)
6
M4 x 20 mm screws 48-0654-xx 4 1
Switch Bracket
Note There are two additional brackets included with the accessory cabinet in Carton 33: 700-23338-xx and 700-23344-xx.
These brackets attach the optional Ethernet switch to the left accessory cabinet. If you ordered this switch, refer to
the Cisco TelePresence System Hardware Options & Upgrade Guide to install the switch.
Key Part Description Part Number Qty Ctn Notes
To Next Page
Loading...
