Cisco 3000 - Page 34

3-8
Cisco TelePresence System 3000
OL-14521-01
Chapter 3 Mounting and Leveling the Plasma Displays
Purpose of Leveling the Plasma displays
Step 6 Use the Plasma display Leveling feet to level the Plasma displays along the X axis.
Use the Display tilt brackets to level the Plasma displays along the Y axis.
Tip You should level the center Plasma display first. Then align the left and right Plasma displays to the
center display.
Figure 3-6 Level the Plasma displays along the X and Y axes
Caution Do not place the level against the Plasma display screen. Place the level against the Plasma display
frame.
201116