3-10
Cisco TelePresence System 3000
OL-14521-01
Chapter 3 Mounting and Leveling the Plasma Displays
Purpose of Leveling the Plasma displays
Step 8 Align the seams of the Display shelves with the seams between Plasma displays.
You may need to adjust the Plasma displays left to right so the seam created between the edges of two
Plasma displays are aligned to the corresponding Display shelf seam.
Caution While moving the Plasma display to the left or right you need to make sure the Plasma display
Leveling feet remain firmly seated on top of the Display shelf supports.
Figure 3-8 Align the seams of the Display shelves with the seams between Plasma displays
To Next Page
Loading...
