4-3
Cisco TelePresence System 3000
OL-14521-01
Chapter 4 Building the Lighting Assembly
Parts List
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Caution Some system components have metal and plastic edges with hard angles. These edges are exposed until
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
Caution Metal and plastic edges can be sharp. Cisco recommends you wear safety gloves and safety glasses when
attaching the lighting assembly.
Note The directions left and right refer to the assembly as you face the Plasma displays.
To Next Page
Loading...
