Cisco 3000 - Page 64

4-26
Cisco TelePresence System 3000
OL-14521-01
Chapter 4 Building the Lighting Assembly
Parts List
Step 23 Attach the two Metal Trim panels to the L-brackets attached to the two (vertical) Plastic Diffuser panels.
Note These Metal Trim panels cover the access opening used to route cables. You may not want to
attach these Metal Trim panels until you complete the cable routing in Chapter 8, “Routing
Power and Signal Cables.”
Figure 4-23 Two Metal Trim panels
201146
11
5
27
11