6-20
Cisco TelePresence System 3000
OL-14521-01
Chapter 6 Building the Table Assembly
Building the Table Assembly, Product ID CTS3K-M-TABLE-G2
Step 3 Assemble the I/O modules for the outside left and outside right molded foam bumpers.
The outside left and outside right molded foam bumpers only have one I/O module each. The inner
molded foam bumpers have two (see Figure 6-17).
Note Steps for routing the Ethernet and power cables are in Chapter 8, “Routing Power and Signal Cables.”
Note The flange on the I/O module cover plate is wider on the bottom than on the top.
Figure 6-16 Foam Bumper Assembly
204176
18
21
19
20
25
22 23 24
To Next Page
Loading...
