Cisco 3110 - Page 35

CommentsPIDOptics Type
x = 7 and 10 mSFP-H10GB-ACUxM10G ACU
x = 1, 2, 3, 5, 7, 10 mSFP-10G-AOCxM10G AOC
The following table lists the supported transceivers for the fixed ports on the Secure Firewall 3130 and 3140,
and the FPR-X-NM-8X25G network module.
Table 6: Supported 25-Gb SFP Transceivers
CommentsPIDOptics Type
—SFP-25G-SR-S25G-SR
Dual rate, longer reachSFP-10/25G-CSR-S25G-CSR
Dual rateSFP-10/25G-LR-S25G-LR
1, 1.5, 2, 2.5, 3, 4, 5 mSFP-H25G-CUxM25G DAC copper
1, 2, 3, 4, 5, 7, 10 mSFP-25G-AOCxM25G AOC
The following table lists the supported transceivers for the fixed ports and the FPR-X-NM-4X40G network
module.
Table 7: Supported 40-Gb SFP Transceivers for FPR3K-X-NM-4X40G
CommentsPIDOptics Type
—QSFP-40G-SR440G-SR4
Ethernet onlyQSFP-40G-SR4-S40G-SR4-S
300 m with OM3QSFP-40G-CSR440G-CSR4
LC connectorQSFP-40G-SR-BD40G-SR-BD
Ethernet onlyQSFP-40G-LR4-S40G-LR4-S
Ethernet and OTU3QSFP-40G-LR440G-LR4
LR4 Lite, up to 2 kmWSP-Q40GLR4L40G-LR4L
QSFP to QSFP copper direct-attach
cables (passive)
Cisco QSFP-H40G-CU (1M, 3M,
5M)
40G-CU
QSFP to 4xSFP copper
direct-attach cables
QSFP-4SFP10G-CUxM (1M, 2M,
3M, 4M, 5M)
Supported beginning
with FTD 7.2 and ASA
7.18.1.
Note
40G-CU-breakout
Cisco Secure Firewall 3110, 3120, 3130, and 3140 Hardware Installation Guide
31
Overview
Supported SFP/SFP+/QSFP+ Transceivers