Cisco 3110 - Hardware Specifications

CommentsPIDOptics Type
QSFP to QSFP copper direct-attach
cables (active)
Cisco QSFP-H40G-ACU (7M,
10M)
40G-CU-A
QSFP to QSFP active optical cablesQSFP-H40G-AOC (1M, 2M, 3M,
5M, 7M, 10M, 15M, 30M)
40G-AOC
QSFP to 4xSFP active optical
cables
QSFP-4X10G-AOC (1M, 2M, 3M,
5M, 7M, 10M, 15M, 30M)
Supported beginning
with FTD 7.2 and ASA
7.18.1.
Note
40G-AOC-breakout
Hardware Specifications
The following table contains hardware specifications for the Secure Firewall 3100.
3140313031203110Specification
1.75 x 17 x 20 inches (4.4 x 43.3 x 50.8 cm)Chassis dimensions
(H x W x D)
1.5 x 3.7 x 10.5 inches (4.39 x 9.4 x 26.67 cm)Network module
dimensions (H x W
x D)
Network Module: 1.6 lb (.73 kg)
SSD: 0.25 lb (.11 kg)
Power supply module: 201 lb (91.17 kg)
Fan module: 0.5 lb (.23)
Chassis component
weights
25 lb (11.4 kg)
2 power supply modules, 1 network
module, 2 dual fan modules, 1 SSD
23 lb (10.5 kg)
1 power supply module, 1 network module,
2 dual fan modules, 1 SSD
Chassis weight
100/240 VAC 6 A (at 100 VAC), 50 to 60 HzSystem power
Operating: 32 to 104°F (-0 to 40°C)
Nonoperating: -4 to 149°F (-20 to 65°C) maximum altitude is 40,000 ft
Temperature
Operating and nonoperating: 10 to 85% noncondensingHumidity
Operating: 10,000 ft maximum
Nonoperating: 40,000 ft maximum
Altitude
Cisco Secure Firewall 3110, 3120, 3130, and 3140 Hardware Installation Guide
32
Overview
Hardware Specifications