Index
IN-9
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
configuration files (continued)
invalid combinations when copying
C-5
limiting TFTP server access 31-16
obtaining with DHCP 3-7
password recovery disable considerations 9-5
specifying the filename 3-12
system contact and location information 31-15
types and location C-10
uploading
preparing
C-10, C-13, C-16
reasons for C-9
using FTP C-14
using RCP C-18
using TFTP C-12
configuration guidelines, multi-VRF CE 35-67
configuration logger 30-11
configuration logging 2-5
configuration settings, saving 3-10
configure terminal command 11-11
config-vlan mode 2-2, 13-7
conflicts, configuration 43-12
connections, secure remote 9-38
connectivity problems 43-14, 43-16, 43-17
consistency checks in VTP Version 2 14-4
console port, connecting to 2-11
conventions
command
xliv
for examples xliv
publication xliv
text xliv
corrupted software, recovery steps with Xmodem 43-2
CoS
in Layer 2 frames
33-2
override priority 15-6
trust priority 15-6
CoS input queue threshold map for QoS 33-16
CoS output queue threshold map for QoS 33-19
CoS-to-DSCP map for QoS 33-61
counters, clearing interface 11-30
crashinfo file 43-24
critical authentication, IEEE 802.1x 10-37
cross-stack EtherChannel
configuration guidelines
34-13
configuring
on Layer 2 interfaces
34-13
on Layer 3 physical interfaces 34-16
described 34-3
illustration 34-4
support for 1-6
cross-stack UplinkFast, STP
described
20-5
disabling 20-16
enabling 20-16
fast-convergence events 20-7
Fast Uplink Transition Protocol 20-6
normal-convergence events 20-7
support for 1-6
cryptographic software image
Kerberos
9-32
SSH 9-37
SSL 9-42
switch stack considerations 5-2, 5-16, 9-38
customer edge devices 35-65
CWDM SFPs 1-26
D
daylight saving time 7-13
dCEF
in the switch stack
35-75
debugging
enabling all system diagnostics
43-21
enabling for a specific feature 43-20
redirecting error message output 43-21
using commands 43-20
default commands 2-4
To Next Page
Loading...
Need help?
General
