Index
IN-32
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
passwords (continued)
VTP domain
14-8
path cost
MSTP
19-21
STP 18-20
path MTU discovery 36-4
PBR
defined
35-82
enabling 35-84
fast-switched policy-based routing 35-85
local policy-based routing 35-85
PC (passive command switch) 6-10
peers, BGP 35-58
percentage thresholds in tracked lists 39-16
performance, network design 1-16
performance features 1-4
persistent self-signed certificate 9-43
per-VLAN spanning-tree plus
See PVST+
PE to CE routing, configuring
35-69
physical ports 11-2
PIM
default configuration
40-9
dense mode
overview
40-4
rendezvous point (RP), described 40-5
RPF lookups 40-7
displaying neighbors 40-52
enabling a mode 40-12
overview 40-4
router-query message interval, modifying 40-27
shared tree and source tree, overview 40-24
shortest path tree, delaying the use of 40-26
sparse mode
join messages and shared tree
40-5
overview 40-5
prune messages 40-5
RPF lookups 40-7
support for 1-11
PIM (continued)
versions
interoperability
40-10
troubleshooting interoperability problems 40-24
v2 improvements 40-4
PIM-DVMRP, as snooping method 24-9
ping
character output description
43-15
executing 43-15
overview 43-14
PoE
auto mode
11-8
CDP with power consumption, described 11-7
CDP with power negotiation, described 11-7
Cisco intelligent power management 11-7
configuring 11-21
devices supported 11-6
high-power devices operating in low-power mode 11-7
IEEE power classification levels 11-7
power budgeting 11-23
power consumption 11-23
powered-device detection and initial power
allocation
11-7
power management modes 11-8
power negotiation extensions to CDP 11-7
standards supported 11-7
static mode 11-9
supported watts per port 11-6
troubleshooting 43-13
policed-DSCP map for QoS 33-63
policers
configuring
for each matched traffic class
33-49
for more than one traffic class 33-59
described 33-4
displaying 33-79
number of 33-34
types of 33-9
To Next Page
Loading...
