Cisco 3750G - Catalyst Integrated Wireless LAN Controller - Page 1192

Index
IN-42
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Smartports macros
applying Cisco-default macros
12-6
applying global parameter values 12-5, 12-6
applying macros 12-5
applying parameter values 12-5, 12-7
configuration guidelines 12-3
creating 12-4
default configuration 12-2
defined 12-1
displaying 12-8
tracing 12-3
website 12-2
SNAP 26-1
SNMP
accessing MIB variables with
31-4
agent
described
31-4
disabling 31-8
authentication level 31-11
community strings
configuring
31-8
for cluster switches 31-4
overview 31-4
configuration examples 31-16
default configuration 31-7
engine ID 31-7
groups 31-7, 31-10
host 31-7
ifIndex values 31-6
in-band management 1-6
in clusters 6-14
informs
and trap keyword
31-12
described 31-5
differences from traps 31-5
disabling 31-15
enabling 31-15
limiting access by TFTP servers 31-16
limiting system log messages to NMS 30-10
SNMP (continued)
manager functions
1-5, 31-3
managing clusters with 6-17
MIBs
location of
B-3
supported B-1
notifications 31-5
overview 31-1, 31-4
security levels 31-3
status, displaying 31-17
system contact and location 31-15
trap manager, configuring 31-14
traps
described
31-3, 31-5
differences from informs 31-5
disabling 31-15
enabling 31-12
enabling MAC address notification 7-22
overview 31-1, 31-5
types of 31-12
users 31-7, 31-10
versions supported 31-2
SNMPv1 31-2
SNMPv2C 31-2
SNMPv3 31-2
snooping, IGMP 24-2
software compatibility
See stacks, switch
software images
location in flash
C-20
recovery procedures 43-2
scheduling reloads 3-17
tar file format, described C-20
See also downloading and uploading
source addresses
in IPv6 ACLs
38-5
source addresses, in IPv4 ACLs 32-12
source-and-destination-IP address based forwarding,
EtherChannel
34-9