Index
IN-52
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
VLAN maps
applying
32-34
common uses for 32-34
configuration guidelines 32-30
configuring 32-29
creating 32-31
defined 32-2
denying access to a server example 32-35
denying and permitting packets 32-31
displaying 32-41
examples of ACLs and VLAN maps 32-32
removing 32-34
support for 1-8
wiring closet configuration example 32-35
VLAN membership
confirming
13-31
modes 13-3
VLAN Query Protocol
See VQP
VLANs
adding
13-9
adding to VLAN database 13-9
aging dynamic addresses 18-10
allowed on trunk 13-21
and spanning-tree instances 13-3, 13-6, 13-13
configuration guidelines, extended-range VLANs 13-13
configuration guidelines, normal-range VLANs 13-6
configuration options 13-7
configuring 13-1
configuring IDs 1006 to 4094 13-13
connecting through SVIs 11-9
creating in config-vlan mode 13-9
creating in VLAN configuration mode 13-10
customer numbering in service-provider networks 17-3
default configuration 13-8
deleting 13-10
described 11-2, 13-1
displaying 13-16
extended-range 13-1, 13-12
VLANs (continued)
features
1-7
illustrated 13-2
internal 13-13
in the switch stack 13-6
limiting source traffic with RSPAN 28-24
limiting source traffic with SPAN 28-16
modifying 13-9
multicast 24-18
native, configuring 13-23
normal-range 13-1, 13-4
number supported 1-7
parameters 13-5
port membership modes 13-3
static-access ports 13-11
STP and IEEE 802.1Q trunks 18-11
supported 13-2
Token Ring 13-6
traffic between 13-2
VLAN-bridge STP 18-11, 42-2
VTP modes 14-3
VLAN Trunking Protocol
See VTP
VLAN trunks
13-16
VMPS
administering
13-32
configuration example 13-33
configuration guidelines 13-29
default configuration 13-29
description 13-28
dynamic port membership
described
13-29
reconfirming 13-31
troubleshooting 13-33
entering server address 13-30
mapping MAC addresses to VLANs 13-28
monitoring 13-32
reconfirmation interval, changing 13-31