Cisco 3750G - Catalyst Integrated Wireless LAN Controller - Page 25

Contents
xxv
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
CHAPTER 30 Configuring System Message Logging 30-1
Understanding System Message Logging 30-1
Configuring System Message Logging 30-2
System Log Message Format 30-2
Default System Message Logging Configuration 30-4
Disabling Message Logging 30-4
Setting the Message Display Destination Device 30-5
Synchronizing Log Messages 30-6
Enabling and Disabling Time Stamps on Log Messages 30-8
Enabling and Disabling Sequence Numbers in Log Messages 30-8
Defining the Message Severity Level 30-9
Limiting Syslog Messages Sent to the History Table and to SNMP 30-10
Enabling the Configuration-Change Logger 30-11
Configuring UNIX Syslog Servers 30-12
Logging Messages to a UNIX Syslog Daemon 30-12
Configuring the UNIX System Logging Facility 30-13
Displaying the Logging Configuration 30-14
CHAPTER 31 Configuring SNMP 31-1
Understanding SNMP 31-1
SNMP Versions 31-2
SNMP Manager Functions 31-3
SNMP Agent Functions 31-4
SNMP Community Strings 31-4
Using SNMP to Access MIB Variables 31-4
SNMP Notifications 31-5
SNMP ifIndex MIB Object Values 31-6
Configuring SNMP 31-6
Default SNMP Configuration 31-7
SNMP Configuration Guidelines 31-7
Disabling the SNMP Agent 31-8
Configuring Community Strings 31-8
Configuring SNMP Groups and Users 31-10
Configuring SNMP Notifications 31-12
Setting the Agent Contact and Location Information 31-15
Limiting TFTP Servers Used Through SNMP 31-16
SNMP Examples 31-16
Displaying SNMP Status 31-17