Contents
xxxi
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Configuring EIGRP 35-35
Default EIGRP Configuration 35-36
EIGRP Nonstop Forwarding 35-38
Configuring Basic EIGRP Parameters 35-39
Configuring EIGRP Interfaces 35-40
Configuring EIGRP Route Authentication 35-40
EIGRP Stub Routing 35-41
Monitoring and Maintaining EIGRP 35-42
Configuring BGP 35-43
Default BGP Configuration 35-45
Nonstop Forwarding Awareness 35-47
Enabling BGP Routing 35-47
Managing Routing Policy Changes 35-50
Configuring BGP Decision Attributes 35-51
Configuring BGP Filtering with Route Maps 35-53
Configuring BGP Filtering by Neighbor 35-54
Configuring Prefix Lists for BGP Filtering 35-55
Configuring BGP Community Filtering 35-56
Configuring BGP Neighbors and Peer Groups 35-57
Configuring Aggregate Addresses 35-59
Configuring Routing Domain Confederations 35-60
Configuring BGP Route Reflectors 35-61
Configuring Route Dampening 35-62
Monitoring and Maintaining BGP 35-63
Configuring Multi-VRF CE 35-64
Understanding Multi-VRF CE 35-65
Default Multi-VRF CE Configuration 35-67
Multi-VRF CE Configuration Guidelines 35-67
Configuring VRFs 35-68
Configuring a VPN Routing Session 35-69
Configuring BGP PE to CE Routing Sessions 35-69
Multi-VRF CE Configuration Example 35-70
Displaying Multi-VRF CE Status 35-74
Configuring Protocol-Independent Features 35-75
Configuring Distributed Cisco Express Forwarding 35-75
Configuring the Number of Equal-Cost Routing Paths 35-76
Configuring Static Unicast Routes 35-77
Specifying Default Routes and Networks 35-78
Using Route Maps to Redistribute Routing Information 35-79
To Next Page
Loading...
Need help?
General
