33-37
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Chapter 33 Configuring QoS
Configuring Standard QoS
Figure 33-12 Port Trusted States within the QoS Domain
Beginning in privileged EXEC mode, follow these steps to configure the port to trust the classification
of the traffic that it receives:
101236
Trunk
Trusted interface
Traffic classification
performed here
Trusted boundary
IP
P1P3
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
interface interface-id Specify the port to be trusted, and enter interface configuration
mode.
Valid interfaces include physical ports.
To Next Page
Loading...
