Cisco 3750G - Catalyst Integrated Wireless LAN Controller - Page 9

Contents
ix
Catalyst 3750 Switch Software Configuration Guide
OL-8550-02
Managing the ARP Table 7-27
CHAPTER 8 Configuring SDM Templates 8-1
Understanding the SDM Templates 8-1
Dual IPv4 and IPv6 SDM Templates 8-2
SDM Templates and Switch Stacks 8-3
Configuring the Switch SDM Template 8-4
Default SDM Template 8-5
SDM Template Configuration Guidelines 8-5
Setting the SDM Template 8-6
Displaying the SDM Templates 8-7
CHAPTER 9 Configuring Switch-Based Authentication 9-1
Preventing Unauthorized Access to Your Switch 9-1
Protecting Access to Privileged EXEC Commands 9-2
Default Password and Privilege Level Configuration 9-2
Setting or Changing a Static Enable Password 9-3
Protecting Enable and Enable Secret Passwords with Encryption 9-3
Disabling Password Recovery 9-5
Setting a Telnet Password for a Terminal Line 9-6
Configuring Username and Password Pairs 9-6
Configuring Multiple Privilege Levels 9-7
Setting the Privilege Level for a Command 9-8
Changing the Default Privilege Level for Lines 9-9
Logging into and Exiting a Privilege Level 9-9
Controlling Switch Access with TACACS+ 9-10
Understanding TACACS+ 9-10
TACACS+ Operation 9-12
Configuring TACACS+ 9-12
Default TACACS+ Configuration 9-13
Identifying the TACACS+ Server Host and Setting the Authentication Key 9-13
Configuring TACACS+ Login Authentication 9-14
Configuring TACACS+ Authorization for Privileged EXEC Access and Network Services 9-16
Starting TACACS+ Accounting 9-17
Displaying the TACACS+ Configuration 9-17