Cisco 4500M

8-9
Software Configuration Guide—Release 12.2(25)EW
OL-6696-01
Chapter 8 Configuring Power over Ethernet
Module Inline Power Summary (Watts)
(12V -> -48V on board conversion)
---------------------------------
Maximum
Mod Used Available
--- ---- ---------
1 128 158
--- ---- ---------
Watts Used of System Power (12V)
Mod Model currently out of reset in reset
---- ----------------- --------- ------------ --------
1 WS-X4013+TS 330 330 330
2 WS-X4548-GB-RJ45V 60 60 20
3 WS-X4548-GB-RJ45V 60 60 20
-- Fan Tray 30 -- --
----------------------- --------- ------------ -------
Total 480 450 370
Watts used of Chassis Inline Power (-50V)
Inline Power Admin Inline Power Oper
Mod Model PS Device PS Device Efficiency
---- ----------------- ---------------- ---------------- ----------
2 WS-X4548-GB-RJ45V 138 123 73 65 89
3 WS-X4548-GB-RJ45V 0 0 22 20 89
----------------------- ---------------- ---------------- ----------
Total 138 123 95 85
Watts used of Module Inline Power (12V -> -50V)
Inline Power Admin Inline Power Oper
Mod Model PS Device PS Device Efficiency
---- ----------------- ---------------- ---------------- ----------
1 WS-X4013+TS 128 128 64 64 100
----------------------- ---------------- ---------------- ----------
switch#
switch# show power inline g1/1
Module 1 Inline Power Supply: Available:158(w) Used:128(w) Remaining:30(w)
Interface Admin Oper Power(Watts) Device Class
From PS To Device
--------- ------ ---------- ---------- ---------- ------------------- -----
Gi1/1 auto on 10.3 10.3 CNU Platform 3
Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
---------- --------------- --------------------
Gi1/1 15.4 15.4
sh power modiuswitch# show power inline g2/1
Chassis Inline Power Supply: Available:800(w) Used:138(w) Remaining:662(w)
Interface Admin Oper Power(Watts) Device Class
From PS To Device
--------- ------ ---------- ---------- ---------- ------------------- -----
Gi2/1 auto on 11.5 10.2 CNU Platform n/a