Index
IN-13
Software Configuration Guide—Release 12.2(25)EW
OL-6696-01
ping
executing
5-6
overview 5-5
ping command 5-6, 25-15
PoE 8-7
configuring power consumption for single device 8-4
configuring power consumption for switch 8-4
power consumption for powered devices
Intelligent Power Management
8-5
overview 8-3
supported cabling topology 8-5
powering down a module 7-15
power management modes 8-1
show interface status 8-6
point-to-point
in 802.1X authentication (figure)
31-2, 31-8
police command 29-32
policed-DSCP map 29-46
policers
description
29-5
types of 29-9
policies
See QoS policies
policing
See QoS policing
policy-map command
29-29, 29-31
policy maps
attaching to interfaces
29-34
configuring 29-30
port ACLs
and voice VLAN
35-4
defined 35-2
limitations 35-4
Port Aggregation Protocol
see PAgP
port-based authentication
802.1X with voice VLAN
31-10
changing the quiet period 31-19
client, defined 31-2
configuration guidelines 31-13
configure 802.1X accounting 31-16
configure switch-to-RADIUS server
communication
31-15
configure with Guest-VLANs 31-17, 31-18
configuring Guest-VLAN 31-15
configuring manual re-authentication of a client 31-19
controlling authorization state 31-4
default configuration 31-12
described 31-2
device roles 31-2
disabling 31-14
displaying statistics 31-22
enabling 31-13
enabling multiple hosts 31-21
enabling periodic re-authentication 31-18
encapsulation 31-2
initiation and message exchange 31-3
method lists 31-13
ports not supported 31-4
resetting to default values 31-22
setting retransmission number 31-21
setting retransmission time 31-20
topologies, supported 31-10
using with port security 31-6
with VLAN assignment 31-5
port-based QoS features
See QoS
port-channel interfaces
See also EtherChannel
creating
17-6
overview 17-2
port-channel load-balance
command
17-12
command example 17-12
port-channel load-balance command 17-12
port cost (STP)
configuring
14-15
PortFast
To Next Page
Loading...
