Cisco 4500M - Page 601

Index
IN-17
Software Configuration Guide—Release 12.2(25)EW
OL-6696-01
and MST 16-2
enabling 15-8
overview 15-2
routed packets
ACLs
35-21
route-map (IP) command 26-3
route maps
defining
26-3
PBR 26-2
router ACLs
description
35-2
using with VLAN maps 35-20
route targets
VPN
28-3
Routing Information Protocol
See RIP
RSPAN
configuration guidelines
39-16
destination ports 39-5
IDS 39-2
monitored ports 39-4
monitoring ports 39-5
received traffic 39-3
sessions
creating
39-17
defined 39-3
limiting source traffic to specific VLANs 39-23
monitoring VLANs 39-22
removing source (monitored) ports 39-21
specifying monitored ports 39-17
source ports 39-4
transmitted traffic 39-4
VLAN-based 39-5
RSTP
compatibility
16-3
description 16-2
port roles 16-3
port states 16-4
S
SAID
See 802.10 SAID
scheduling
29-13
defined 29-4
overview 29-5
secondary root switch 14-12
secondary VLANs
associating with primary
36-6
description 36-2
permitting routing 36-11
secure ports, configuring 32-1
Security Association Identifier
See 802.10 SAID
servers, VTP
See VTP servers
service-policy command
29-29
service-policy input command 22-2, 29-34
service-provider networks
and customer VLANs
19-2
Layer 2 protocols across 19-7
set default interface command 26-4
set interface command 26-4
set ip default next-hop command 26-4
set ip next-hop command 26-4
show adjacency command 24-9
show boot command 3-24
show catalyst4000 chassis-mac-address command 14-3
show cdp command 20-2, 20-3
show cdp entry command 20-4
show cdp interface command 20-3
show cdp neighbors command 20-4
show cdp traffic command 20-4
show ciscoview package command 9-16
show ciscoview version command 9-16
show cluster members command 9-13
show configuration command 4-9
show debugging command 20-4