Cisco 5505 - ASA Firewall Edition Bundle

A-4
Cisco AnyConnect VPN Client Administrator Guide
OL-12950-012
Appendix A Sample AnyConnect Profile and XML Schema
Sample AnyConnect Profile Schema
<xs:documentation>A HostEntry comprises the data needed to identify and
connect to a specific host.</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="HostName">
<xs:annotation>
<xs:documentation>Can be an alias used to refer to the host
or an FQ
DN or IP address. If an FQDN or IP address is used, a HostAddress is not
required.</xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="HostAddress" minOccurs="0">
<xs:annotation>
<xs:documentation>Can be a FQDN or IP
address.<
/xs:documentation>
</xs:annotation>
</xs:element>
<xs:element name="BackupServerList" type="ns1:BackupServerList"
minOccurs
="0">
<xs:annotation>
<xs:documentation>Collection of one or more backup servers
to be use
d in case the user selected one fails.</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
<xs:complexType name="AnyConnectClientProfile">
<xs:annotation>
<xs:documentation>This is the XML schema definition for the Cisco AnyConnect
VPN Cli
ent Profile XML file. The VPN Client Initialization is a repository of information
used to manage the Cisco VPN client software. This file is intended to be maintained by a
Secure Gateway administrator and then distributed with the client software. The xml file
based on this schema can be distributed to clients at any time. The distribution
mechanisms supported are as a bundled file with the software distribution or as part of
the automatic download mechanism. The automatic download mechanism only available with
certain Cisco Secure Gateway products.</xs:documentation>
</xs:annotation>
<xs:sequence>
<xs:element name="ClientInitialization" minOccurs="0">
<xs:annotation>
<xs:documentation>The ClientInitialization section represents global
settings
for the client. In some cases (e.g. BackupServerList) host specific overrides
are possible.</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:sequence>
<xs:element name="UseStartBeforeLogon" default="false"
minOccurs
="0">
<xs:annotation>
<xs:documentation>The Start Before Logon feature can be used
to activa
te the VPN as part of the logon sequence.</xs:documentation>
</xs:annotation>
<xs:complexType>
<xs:simpleContent>
<xs:extension base="ns1:simpleBinary">
<xs:attribute name="UserControllable"
default="
false">
<xs:annotation>