5-10
Cisco AnyConnect VPN Client Administrator Guide
OL-12950-012
Chapter 5 Configuring AnyConnect Features Using ASDM
Configuring, Enabling, and Using Other AnyConnect Features
Changing Compression Globally
To change the global compression settings, use the compression svc command from global
configuration mode:
compression svc
no c
ompression svc
To remove the command from the configuration, use the no fo
rm of the command.
In the following example, compression is disabled for all SSL VPN connections globally:
hostname(config)# no compression svc
Changing Compression for Groups and Users
You can also configure compression for specific groups or users using ASDM with the svc compression
command in group-policy and username webvpn modes. The global setting overrides the group-policy
and username settings.
To change compression for a specific group or user, use the Compression setting in either Group Policy
o
r Username. You can get to this setting through any of the following paths:
• Configuration > Remote Access VPN > Network (Client) Access > Group Policies > Add or Edit >
Add or Edit Internal Group Policy > Advanced > SSL VPN Client
• Configuration > Remote Access VPN > Network (Client) Access > AAA Setup > Local Users > Add
or Edit > Add or Edit User Account > VPN Policy > SSL VPN Client
• Device Management > Users/AAA > User Accounts > Add or Edit > Add or Edit User Account >
VPN Policy > SSL VPN Client
Figure 5-9 sho
ws an example of configuring the compression setting for an internal group policy.