7-3
Cisco AnyConnect VPN Client Administrator Guide
OL-12950-012
Chapter 7 Configuring and Using AnyConnect Client Operating Modes and User Profiles
AnyConnect Client Operating Modes
[ Data Transfer ]
Bytes(sent/received): 1950410/23861719
Packets (sent/received): 18346/28851
Bypassed (outbound/inbound): 0/0
Discarded (outbound/inbound): 0/0
[ Secure Routes ]
Network Subnet
0.0.0.0 0.0.0.0
VPN>
disconnect
Closes a previously established connection; for example:
VPN> disconnect
>> state: Disconnecting
>> state: Disconnected
>> notice: VPN session ended.
VPN>
quit
or exit
Either command exits the CLI interactive mode; for example:
quit
goodbye
>>state: Disconnected
Linux or Mac OS X
/opt/cisco/vpn/bin/vpn connect 1.2.3.4
Establishes a connection to a security appliance with the address 1.2.3.4.
/opt/cisco/vpn/bin/vpn connect some_asa_alias
Establishes a connection to a security appliance by reading the profile and looking up the alias
some_asa_alias in order to find its address.
/opt/cisco/vpn/bin/vpn stats
Displays statistics about the vpn connection.
/opt/cisco/vpn/bin/vpn disconnect
Disconnect the vpn session if it exists.
Connecting Using WebLaunch
The Cisco AnyConnect VPN Client provides a browser interface for users who prefer to a graphical user
interface. WebLaunch mode lets the user enter the URL of the security appliance in the Address or
Location field of a browser using the https protocol. For example:
https://209.165.200.225
The user then enters the username and password information on a Logon screen and selects the group
and clicks submit. If you have specified a banner, that information appears, and the user acknowledges
the banner by clicking Continue.
The portal window appears. To start the AnyConnect cl
ient, the user clicks Start AnyConnect on the
main pane. A series of documentary windows appears. When the Connection Established dialog box
appears, the connection is working, and the user can proceed with online activities.
To Next Page
Loading...
Need help?
General