8
Cisco AnyConnect VPN Client Administrator Guide
OL-12950-012
About This Guide
Related Documentation
Related Documentation
For more information, refer to the following documentation:
• Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
• Cisco ASA 5500 Series Release Notes
• Cisco ASDM Release Notes
• Cisco ASDM Online Help
• Release Notes for Cisco AnyConnect VPN Client, Release 2.0
• Cisco Security Appliance Command Reference
• Cisco Security Appliance Logging Configuration and System Log Messages
• Cisco Secure Desktop Configuration Guide for Cisco ASA 5500 Series Administrators
• For Open Source License information for this product, please see the following link:
http://www.cisco.com/en/US/docs/security/
asa/asa80/license/opensrce.html#wp50053.
Document Organization
This guide includes the chapters and appendixes described in Table 1.
Ta b l e 1 Document Organization
Chapter/Appendix Definition
Chapter 1, “Introduction” Provides a high-level overview of t
he Cisco Anyconnect VPN Client.
Chapter 2, “Common
AnyConnect VPN Client
Installation and Configuration
Procedures”
Describes how to access the required files and
install the Cisco AnyConnect VPN Client
on the security appliance and on the remote user PCs.
Chapter 3, “Installing the
AnyConnect Client and
Configuring the Security
Appliance with ASDM”
Describes how to use ASDM to install the Cisco AnyConnect VPN Client on the security
ap
pliance.
Chapter 4, “Installing the
AnyConnect Client on a Security
Appliance Using CLI”
Describes how to use the command-line interface to install the Cisco AnyConnect VPN
Cl
ient on the security appliance.
Chapter 5, “Configuring
AnyConnect Features Using
ASDM”
Describes how to use ASDM to configure the v
arious features of the Cisco AnyConnect
VPN Client on the security appliance.
Chapter 6, “Configuring
AnyConnect Features Using
CLI”
Describes how to use ASDM to configure the v
arious features of the Cisco AnyConnect
VPN Client on the security appliance.
Chapter 7, “Configuring and
Using AnyConnect Client
Operating Modes and User
Profiles”
Describes how to configure and use AnyConnect
client operating modes and XML users
profiles.