Cisco 6851 Administration Guide

DescriptionParameter
Removes caller ID blocking on all outbound calls.
Defaults to *62.
Block CID Deact Code
Removes caller ID blocking on the next inbound call.
Defaults to *81.
Block CID Per Call Act Code
Removes caller ID blocking on the next inbound call.
Defaults to *82.
Block CID Per Call Deact Code
Blocks all anonymous calls.
Defaults to *77.
Block ANC Act Code
Removes blocking of all anonymous calls.
Defaults to *87.
Block ANC Deact Code
Enables the do not disturb feature.
Defaults to *78.
DND Act Code
Disables the do not disturb feature.
Defaults to *79.
DND Deact Code
Makes all outbound calls secure.
Defaults to *16.
Secure All Call Act Code
Makes all outbound calls not secure.
Defaults to *17.
Secure No Call Act Code
Makes a secure call.
Default: *18.
Secure One Call Act Code
Disables secure call feature.
Default: *19.
Secure One Call Deact Code
The star code used for paging the other clients in the
group.
Defaults to *96.
Paging Code
The star code used for parking the current call.
Defaults to *68.
Call Park Code
The star code used for picking up a ringing call.
Defaults to *97.
Call Pickup Code
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
257
Phone Troubleshooting
Vertical Service Activation Codes

Cisco 6851 Specifications

General

Network Protocols	SIP
Speakerphone	Yes
Bluetooth	No
Wi-Fi	No
USB Port	No
Display	3.5 inch grayscale display (396 x 162 pixels)
Ethernet	10/100 Ethernet
PoE	IEEE 802.3af
Audio	Wideband audio
Line Keys	4
Headset Port	RJ9
Supported Codecs	G.711, G.722, G.729, iLBC
Weight	0.9 kg