Calling Features
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 25
When you press and hold the “*” key for at least 1 second, a tone plays. The corresponding tone stops
after one second.
Dialing an International Number
1. Press and hold the “*” key for at least 1 second. The + sign is entered as the first digit in the
phone number. (The corresponding tone stops to indicate that the * has changed to a + sign.)
2. Dial the international number.
Redial
Press the Redial button to call the most recently dialed phone number.
Redial a Number
To redial a number:
• On Cisco Unified IP Phone 6901, go off-hook and press the Redial button.
• On Cisco Unified IP Phone 6911, press the Redial button . You can be off-hook or on-hook
when you press this button.
Shared Lines
Shared lines allow you to use one phone number for multiple phones.
You may have a shared line if you have multiple phones and want one phone number, share
call-handling tasks with co-workers, or handle calls on behalf of a manager.
For example, if you share a line with a coworker:
• When a call comes in on the shared line:
–
Your phone rings and the Line button flashes amber.
–
Your coworker’s phone rings and the Line button flashes amber.
• If you answer the call:
–
Your Line button turns green.
–
Your coworker’s Line button turns red.
When button is red, and if auto barge is enabled, you can auto barge a call by going off hook
or make a new call, if auto barge is disabled.
• If you put the call on hold:
–
Your Line button flashes green
To Next Page
Loading...
Need help?
General
