Cisco 7600 Series Hardware

3
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Document Revision History
OL-10362-12 April, 2010 Added the following for Cisco IOS release 12.2(33)SRE1:
• Added support for 40 DWDM SFPs to RSP 720:
– RSP720-3C-GE
– RSP-720-3CXL-GE
– RSP720-3C-10GE
– RSP-720-3CXL-10GE
• Added support for 8 additional DWDM SFPs
(DWDM-SFP-3346, DWDM-SFP-3739, DWDM-SFP-4134,
DWDM-SFP-4532, DWDM-SFP-4931, DWDM-SFP-5332,
DWDM-SFP-5736, DWDM-SFP-6141) to:
– WS-SUP32-10GE-3B
– WS-SUP32-GE-3B
– WS-X6724-SFP
– WS-X6748-SFP
• Added support for 8 additional CWDM SFPs
(CWDM-SFP-1470, CWDM-SFP-1490, CWDM-SFP-1510,
CWDM-SFP-1530, CWDM-SFP-1550, CWDM-SFP-1570,
CWDM-SFP-1590, CWDM-SFP-1610) to RSP 720:
– RSP720-3C-GE
– RSP-720-3CXL-GE
– RSP720-3C-10GE
– RSP-720-3CXL-10GE
• Added support for XFP-10G-MM-SR to the following line
cards and SIPs:
– 7600ES+2TG3C, 7600ES+2TG3CXL
– 7600ES+4TG3C, 7600ES+4TG3CXL
– 76-ES+XC-20G3C, 76-ES+XC-20G3CXL
– 76-ES+XC-40G3C, 76-ES+XC-40G3CXL
– 76-ES+XT-2TG3C, 76-ES+XT-2TG3CXL
– 76-ES+XT-4TG3C, 76-ES+XT-4TG3CXL
– 76-ES+T-2TG3CXL, 76-ES+T-20G3CXL
– 76-ES+T-4TG3CXL, 76-ES+T-40G3CXL
– SIP-400, SIP-600 on 10GE SPA
• Added support for WAN/OTN to the following line cards:
– 76-ES+XC-20G3C
– 76-ES+XC-20G3CXL
– 76-ES+XC-40G3C
– 76-ES+XC-40G3CXL
Revision Date Change Summary

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13