Cisco 7600 Series Hardware

4
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Document Revision History
OL-10362-11 December, 2009 Added the following for Cisco IOS release 12.2(33)SRE:
• Added support for the following ES+ Combo cards:
– 76-ES+XC-40G3CXL
– 76-ES+XC-40G3C
– 76-ES+XC-20G3CXL
– 76-ES+XC-20G3C
– SFP-GE-T/S/L/Z support on X6724/X6748
– DWDM-X2-xx.xx and X2-10GB-LRM, X2 10GB-ZR
support on 7600 cards (RSP720-10GE and
WS-X6708-10GE)
– DWDM-X2-xx.xx and X2-10GB-LRM, X2 10GB-ZR
support on 7600 cards (RSP720-10GE and
WS-X6708-10GE)
– Enabled support for additional DWDM SFPs
(DWDM-SFP-3346, DWDM-SFP-3739,
DWDM-SFP-4134, DWDM-SFP-4532,
DWDM-SFP-4931, DWDM-SFP-5332,
DWDM-SFP-5736, DWDM-SFP-6141) in ES+ and
ES+Combo
– Enabled support for additional DWDM SFPs
(DWDM-SFP-3346, DWDM-SFP-3739,
DWDM-SFP-4134, DWDM-SFP-4532,
DWDM-SFP-4931, DWDM-SFP-5332,
DWDM-SFP-5736, DWDM-SFP-6141) in
ES20/SIP400/SIP600 (HW)
– PWR-4500-DC Power Supply
• 76-ES+XT-2TG3C
• 76-ES+XT-4TG3C
• Support for ES+ transport card is extended to12.2(33) SRE
• Added support for SFP-OC3-LR1to SPA-1XCHSTM1/OC3
on SIP-400
OL-10362-10 May, 2009 Added the following for Cisco IOS release 12.2(33)SRD4:
• Added support for the following ES+ transport cards:
– 76-ES+T-20G
– 76-ES+T-40G
– 76-ES+T-2TG
– 76-ES+T-4TG
Revision Date Change Summary

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13