Cisco 7600 Series Hardware

5
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Document Revision History
OL-10362-9 May, 2009 Added the following for Cisco IOS release 12.2(33)SRD2:
• Added support for SFP-GE-T, SFP-GE-S, SFP-GE-L, and
SFP-GE-Z to WS-X6724-SFP and WS-X6748-SFP line
cards.
• Added support for ONS-SC-155-EL to the
SPA-1ChOC3-CE-ATM on the SIP-400 and to the
SPA-1XCHSTM1/OC3 on the SIP-400.
OL-10362-8 February, 2009 Added the following for Cisco IOS release 12.2(33)SRD1:
• 76-ES+XT-2TG3CXL
• 76-ES+XT-4TG3CXL
OL-10362-7 October, 2008 Added the following for Cisco IOS release 12.2(33)SRD:
• 7600-ES+2TGCXL
• 7600-ES+2TG3C
• 7600-ES+4TGCXL
• 7600-ES+4TG3C
• 7600-ES+40G3C
• 7600-ES+20G3CXL
• 7600-ES+20G3C
• 7600-ES+40G3CXL
• CWDM SFP Support
• DWDM SFP Support
• XFP-10GER-OC192IR= Version 2 XFP support
• SFP-GE-T= with ES40 Line Card Support
• XFP-10GZR-OC192LR+= XFP Support
• support BX optics (GLC-BX-U=, GLC-BX-D=) with GE
SPA (SIP line cards), ES20 & ES40 line cards
• DWDM XFP support
• SPA-8X1FE-TX-V2 and SPA-4X1FE-TX-V2 Support on
SIP-400
• Network Analysis Modules (NAMs) Support for
RSP720-10GE
OL-10362-6 May, 2008 Added the following for Cisco IOS release 12.2(33)SRC1:
• SPA-4XT-Serial SPA support on SIP-200
• Additional DWDM XFP support for ES20 line card, SIP-400,
and SIP-600
Revision Date Change Summary

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13