Cisco 7600 Series Hardware

33
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
X2 Modules
Note XENPAK-10GB-ER units is not supported with Part Number 800-24557-01, as described in this external field notice
(CSCee47030):
http://www.cisco.com/warp/public/770/fn29736.shtml
XENPAK-10GB-LR
10GBASE-LR Serial 1310-nm long-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF)
12.2(33)SRA
Product ID
(append “=” for spares) Product Description
Minimum
Software Version
X2-10GB-SR
10GBASE-SR Serial 850-nm short-reach multimode (MMF) 12.2(33)SRC
X2-10GB-CX4
10GBASE for CX4 (copper) cable 12.2(33)SRC
X2-10GB-LX4
10GBASE-LX4 Serial 1310-nm multimode (MMF) 12.2(33)SRC
X2-10GB-LR
10GBASE-LR Serial 1310-nm long-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF)
12.2(33)SRC
X2-10GB-ER
10GBASE-ER Serial 1550-nm extended-reach, single-mode fiber (SMF),
dispersion-shifted fiber (DSF)
12.2(33)SRC
Product ID
(append “=” for spares) Product Description
Minimum
Software Version

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13