Cisco 7600 Series - 2-Port and 4-Port OC-3 c;STM-1 ATM SPA Overview

48
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
OL-10362-13
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Supported Hardware
WS-X6548-GE-TX
2.98 A@42 V 48-port 10/100/1000 Mbps
• RJ-45
• CEF256
• WS-X6548-GE-TX supports WS-F6K-VPWR-GE and WS-F6K-GE48-AF
• WS-X6548V-GE-TX supports WS-F6K-VPWR-GE
• WS-X6548-GE-45AF has WS-F6K-GE48-AF
• QoS port architecture (Rx/Tx): 1q2t/1p2q2t
Number of ports: 48
Number of port groups: 2
Port ranges per port group: 1–24, 25–48
WS-X6548V-GE-TX
3.40 A@42 V
WS-X6548-GE-45AF
3.16 A@42 V
With Supervisor Engine 720
(except WS-F6K-GE48-AF)
12.2(33)SRA
WS-F6K-GE48-AF with Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
WS-F6K-GE48-AF with Supervisor Engine 32 12.2(33)SRA
With RSP 720-1GE 12.2(33)SRB
With RSP 720-10GE 12.2(33)SRC
Note
•
More than 1 Gbps of traffic per EtherChannel is supported on the WS-X6548-GE-TX (and voice-power
daughtercard-equipped) switching modules.
• WS-X6548-GE-TX and WS-X6548V-GE-TX do not support these features:
– ISL trunking
– Jumbo frames
– 802.1Q tunneling
– Traffic storm control
WS-X6148A-GE-TX
2.50 A@42 V 48-port 10/100/1000 Mbps
• RJ-45
• WS-X6148A-GE-TX supports WS-F6K-GE48-AF
• WS-X6148A-GE-45AF has WS-F6K-GE48-AF
• QoS port architecture (Rx/Tx): 1q2t/1p2q2t
• Number of ports: 48
Number of port groups: 2
Port ranges per port group: 1–24, 25–48
WS-X6148-GE-45AF
2.68 A@42 V
With Supervisor Engine 720 12.2(33)SRA
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version