Manage Phones with TR-069
You can use the protocols and standards defined in Technical Report 069 (TR-069) to manage phones. TR-069
explains the common platform for management of all phones and other customer-premises equipment (CPE)
in large-scale deployments. The platform is independent of phone types and manufacturers.
As a bidirectional SOAP/HTTP-based protocol, TR-069 provides the communication between CPEs and Auto
Configuration Servers (ACS).
For TR-069 Enhancements, see TR-069 Parameter Comparison, on page 329.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 80.
Procedure
Step 1 Select Voice > TR-069.
Step 2 Set up the fields as described in TR-069, on page 302.
Step 3 Click Submit All Changes.
View TR-069 Status
When you enable TR-069 on a user phone, you can view status of TR-069 parameters on the Configuration
page.
Before you begin
Access the phone administration web page. See Access the Phone Web Page, on page 80.
Procedure
Select Info > Status > TR-069 Status.
You can view status of TR-069 parameters in TR-069, on page 302.
Enable Electronic Hookswitch
The Electronic Hookswitch feature enables users to use headsets that electronically connect a wireless headset
to a phone. Typically, the headset requires a base that plugs into the phone and communicates with the headset.
Here are the supported headsets:
• Plantronics Savi 740
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
183
Cisco IP Phone Administration
Manage Phones with TR-069
To Next Page
Loading...
Need help?
General
