Cisco 7861 User Manual

Before you begin
Your administrator enables your phone with call recording.
Procedure
Step 1 Press Record while on an active call.
Step 2 (Optional) While recording is in progress, you can press PauseRec to pause the recording.
Step 3 (Optional) Press ResumeRec to resume the recording.
Step 4 (Optional) Press StopRec to stop the recording.
Step 5 Press End Call to end the call.
Instant Message and Presence Contacts
Instant message and presence (IM&P) contacts display their presence information. You can see if the person
is available, busy, or unavailable, or if the person does not want to be disturbed.
You use the UC-One Communicator to manage your lists of contacts. Your phone gets your lists of contacts
from the UC-One Communicator server.
When you use the phone, the phone sends status information to the UC-One Communicator.
Presence
Your company may use the “UC-One Communicator” service and integrate it with the phone. You can use
this service to display the status of your contacts.
On the phone, your status is displayed on the status line of the phone. You see one of the following:
• Available
• Away
• Do Not Disturb
• Offline
For more information on the “UC-One Communicator” service, see the Broadsoft documentation.
Make a Call to an IM and Presence Contact
When you call someone on your IM&P contacts, their presence state is displayed in your call history.
Before you begin
You administrator enables the IM&P directory in the phone.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
51
Calls
Instant Message and Presence Contacts

Cisco 7861 Specifications

General

Speakerphone	Yes
Wall Mountable	Yes
Protocols	SIP
Display	3.5-inch grayscale
PoE	Yes
Audio Codec	G.711, G.729, G.722, iLBC
Headset Port	Yes
Weight	1031 g
Line Keys	16 line keys