Cisco 7905 Phone Guide

20 78-16319-01
Advanced Call-Handling
Advanced call-handling tasks involve special (non-standard) features that your system administrator
might configure for your phone depending on your call-handling needs and work environment. You
will not have access to these features by default.
Storing and Retrieving Parked Calls
You can “park” a call when you want to store the call so that you or someone else can retrieve it from
another phone in the Cisco CallManager system (for example, at a co-worker’s desk or in a conference
room).
Call Park is a special feature that your system administrator might configure for you.
Note You have a limited amount of time to retrieve the parked call before it reverts to ringing at its
original destination. See your system administrator for this time limit.
Redirecting a Ringing Call to Your Phone
Call PickUp allows you to redirect a call that is ringing on a co-worker’s phone to your own phone so
that you can answer it.
Call PickUp is a special feature that your system administrator might configure for you, depending on
your call-handling needs and work environment. For example, you might use this feature if you
typically share call-handling responsibilities with co-workers.
If you want to... Then...
Store an active call using
Call Park
During a call, select more > Park. The LCD screen displays the special
call park number at which the call is stored. Make a note of the call
park number and hang up.
Retrieve a parked call Enter the call park number from any Cisco IP Phone in your network
to connect to the call.

Cisco 7905 Specifications

General

Brand	Cisco
Model	7905
Category	IP Phone
Language	English