Cisco 7931G Manual

Related Topics
Security Configuration Menu
802.1X Authentication and Status
UCR 2008
The IP Phones using SCCP support Unified Capabilities Requirements (UCR) 2008 by providing the following
functions:
•
Support for Federal Information Processing Standard (FIPS) 104-2: To support FIPS 104-2, the phone
requires:
◦
Use of Power On Self Testing (POST) to ensure that the appropriate encryption algorithms are
available. If the phone does not have the correct modules in the firmware, the phone will fail to
boot.
◦
Use of HTTPS for all internet communications.
◦
Disabling of Web Access to the phone.
◦
That the Cisco Unified Communications Manager to be set up for FIPS compliance (for example,
disabling 802.1x EAP-MD5).
•
TVS IPv6: The phone displays the IPv6 address of a Trust Verification Service (TVS) server, if an IPv6
address is available.
•
80-bit SRTCP Tagging: The phone handles both 32-bit and 80-bit SRTCP packet headers seamlessly.
As an IP Phone administrator, some of these functions require you to set up specific parameters in the Cisco
Unified Communications Manager administration interface.
The following table shows where you can find addition information about UCR 2008 in this and other
documents.
Table 6: Cisco Unified IP Phone UCR 2008 Topics
ReferenceTopic
See Troubleshooting Guide for Cisco Unified Communications
Manager.
Detailed explanation of security, including set up,
configuration, and troubleshooting information for Cisco
Unified Communications Manager and Cisco Unified IP
Phones
UCR 2008 SetupSetting up UCR 2008 parameters
Cisco Unified IP Phone Displays Security Error MessageTroubleshooting POST problems
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
22
Cisco Unified IP Phone 7931G
UCR 2008

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g