DescriptionItem
Places calls on hold.Hold button4
Connects a call to another number.Transfer button5
Connects to the last dialed number.Redial button6
Allows you to dial phone numbers, enter letters, and choose menu items.Keypad7
Toggles the microphone on or off. When the microphone is muted, the button
is lit.
Mute button8
Controls the handset, headset, and speakerphone volume (off-hook) and the
ringer volume (on-hook).
Volume button9
Toggles the speakerphone on or off. When the speakerphone is on, the button
is lit.
Selects the speakerphone as the default audio path and initiates a new call,
picks up an incoming call, or ends a call. During a call, the button is lit green.
The speakerphone audio path does not change until you select a new default
audiopath (for example, by picking up the handset).
If external speakers are connected, the Speakerphone button uses these speakers
as the default audio path.
Speaker button10
Functions like a traditional handset.Handset11
Indicates an incoming call or new voice message. Flashes for an incoming
call and remains on when there is a message waiting.
Handset indicator light12
Displays information such as line or call status, phone number, and softkey.Phone screen13
Shows the Cisco Unified IP Phone model number.Cisco Unified IP Phone model14
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 9.0 (SCCP
and SIP)
4
Cisco Unified IP Phone 7931G
Buttons and Hardware