Cisco 7942G - Page 102

5-4
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Call display
restrictions
Determines the information that will display for
calling or connected lines, depending on the parties
who are involved in the call.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Understanding Route
Plans” chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Call
Display Restrictions” chapter.
Call forward Allows users to redirect incoming calls to another
number. Call forward options include Call Forward
All, Call Forward Busy, Call Forward No Answer,
and Call Forward No Coverage.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Configuring
Directory Numbers” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phones”
chapter.
• “Specifying Options that Appear on the
User Options Web Pages” section on
page 5-20
Call forward all
destination override
Allows you to override Call Forward All (CFA) in
cases where the CFA target places a call to the CFA
initiator. This feature allows the CFA target to
reach the CFA initiator for important calls. The
override works whether the CFA target phone
number is internal or external.
For more information, refer to Cisco Unified
Communications Manager System Guide,
“Understanding Directory Numbers” chapter.
Call forward all loop
breakout
Detects and prevents Call Forward All loops.
When a Call Forward All loop is detected, the Call
Forward All configuration is ignored and the call
rings through.
For more information, refer to Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Call forward all loop
prevention
Prevents a user from configuring a Call Forward
All destination directly on the phone that creates a
Call Forward All loop or that creates a Call
Forward All chain with more hops than the existing
Forward Maximum Hop Count service parameter
allows.
For more information, refer to Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Call forward
configurable display
Allows you to specify information that appears on
a phone when a call is forwarded. This information
can include the caller name, caller number,
redirected number, and original dialed number.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phones”
chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference