Cisco 7942G Administration Guide

4-11
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-3
• Overview of Options Configurable from a Phone, page 4-4
• Device Configuration Menu, page 4-11
Device Configuration Menu
The Device Configuration menu provides access to eight sub-menus from which you can view a variety
of settings that are specified in the configuration file for a phone. (The phone downloads the
configuration file from the TFTP server.) These sub-menus are:
• Unified CM Configuration Menu, page 4-11
• SIP Configuration Menu (SIP Phones Only), page 4-12
• Call Preferences Menu (SIP Phones Only), page 4-14
• HTTP Configuration Menu, page 4-15
• Locale Configuration Menu, page 4-16
• NTP Configuration Menu, page 4-17
• UI Configuration Menu, page 4-17
• Media Configuration Menu, page 4-19
• Ethernet Configuration Menu, page 4-21
• Security Configuration Menu, page 4-22
• QoS Configuration Menu, page 4-23
• Network Configuration Menu, page 4-24
For instructions about how to access the Device Configuration menu and its sub-menus, see the
“Displaying a Configuration Menu” section on page 4-2.
Unified CM Configuration Menu
The Unified CM Configuration menu contains the options Unified CM 1, Unified CM 2, Unified CM 3,
Unified CM 4, and Unified CM 5. These options show Cisco Unified
Communications Manager servers
that are available for processing calls from the phone, in prioritized order. To change these options, use
Cisco
Unified Communications Manager Administration, Cisco Unified CM Group Configuration.
For an available Cisco Unified Communications Manager server, an option on the CallManager
Configuration menu will show the Cisco
Unified Communications Manager server IP address or name
and one of the states shown in
Table 4-4.

Cisco 7942G Specifications

General

Lines	2
Audio Codec Support	G.711, G.729a, G.729ab, G.722
Network Protocols	SIP, SCCP
Ethernet Ports	2 x 10/100
Power Options	PoE 802.3af, Optional Power Cube
Speakerphone	Yes
Headset Port	Yes
Weight	3.5 lbs