4-31
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17679-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
802.1X Authentication and Status
The 802.1X Authentication and 802.1X Authentication Status menus allow you to enable 802.1X
authentication and monitor its progress. These options are described in
Table 4-21 and Table 4-22.
You can access the 802.1X Authentication settings by pressing the Settings button and choosing
Security Configuration > 802.1X Authentication and Security Configuration > 802.1X
Authentication Status.
Unified CM/TFTP
Server
Common Name (from the Cisco Unified
Communications Manager Certificate) of a
Cisco Unified Communications Manager and
TFTP server used by the phone. Also displays
a certificate icon
if a certificate is
installed for this server.
For more information about this file, refer to the
“Configuring the Cisco CTL Client” section in
Cisco Unified Communications Manager Security
Guide.
SRST Router Common Name (from the Cisco Unified
Communications Manager Certificate) of the
trusted SRST router that is available to the
phone, if such a device has been configured in
Cisco Unified Communications Manager
Administration. Also displays a certificate icon
if a certificate is installed for this server.
For more information about this file, refer to the
“Configuring the Cisco CTL Client” section in
Cisco Unified Communications Manager Security
Guide.
Table 4-20 Trust List Menu Settings (continued)
Option Description To Change
To Next Page
Loading...
