Cisco 7970 Series - Understanding Feature Buttons and Menus

-22 OL-16993-01
Caution Use only a soft, dry cloth to wipe the touchscreen. Do not use any liquids or powders on
the phone, as they can contaminate phone components and cause failures.
Understanding Feature Buttons and Menus
Press a feature button to open or close a feature menu.
Enable the touchscreen
(after disabling it)
Press (flashing) and hold for more than one second.
Wake the touchscreen
from sleep mode
Press the touchscreen or any button, or lift the handset.
After a period of inactivity (determined by your system administrator),
the touchscreen enters sleep mode to save power. In this mode, the
touchscreen appears blank and
remains lit.
If you want to... Then...
Open or close a feature
menu
Press a feature button:
Messages
Services
Help
Directories
Settings
Scroll through a list or
menu
Press the Navigation button.
Go back one level in a
feature menu
Press Exit. Pressing Exit from the top level of a menu closes the menu.
Switch between open
feature menus
Press a feature tab on your touchscreen. Each feature menu has a
corresponding tab. The tab is visible when the feature menu is open.
If you want to... Then...