EasyManuals Logo

Cisco 7975G Installation Guide

Cisco 7975G
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
The Cisco Unified IP Phone 7971G-GE and 7970G do not support wireless headsets.Note
Headset Connection
To connect a headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the phone.
Press the Headset button on the phone to place and answer calls by using the headset.
You can use the headset with all Cisco Unified IP Phone features, including the Volume and Mute buttons.
Use these buttons to adjust the ear piece volume and to mute the speech path from the headset microphone.
The wireless headset remote hookswitch control feature allows you to use a wireless headset with the Cisco
Unified IP Phone. See the wireless headset documentation for information about connecting the headset and
using the features.
Disable Headset
You can disable the headset by using Cisco Unified Communications Manager Administration.
To disable the headset, perform the following steps:
Procedure
Step 1
Choose Device > Phone and locate the phone you want to modify.
Step 2
In the Phone Configuration window, check the Disable Speakerphone and Headset check box.
Step 3
Click Apply.
Wireless Headset
The Cisco Unified IP Phones 7971G-GE and 7970G do not support wireless headsets.Note
By default, the Wireless Headset Hookswitch Control option is disabled. You can enable the option in the
Cisco Unified Communications Manager Administration application.
See the wireless headset documentation for information about connecting the headset and using the features.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
5
Cisco Unified IP Phones Installation
Headset

Other manuals for Cisco 7975G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7975G and is the answer not in the manual?

Cisco 7975G Specifications

General IconGeneral
Handset typeWired handset
Product typeIP Phone
Product colorGrey, Silver
SpeakerphoneYes
Voice codecsG.711Mu, G.711a, G.722, G.729A, iLBC
Number of melodies24
Aspect ratio4:3
Display diagonal5.6 \
Display resolution320 x 240 pixels
Lines quantity8 lines
Phonebook capacity- entries
Number of VoIP accounts-
Front cameraNo
Security algorithms128-bit AES
Networking standardsIEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsDHCP, TFTP
Volume controlDigital
Headphone outputs1
Ethernet LAN (RJ-45) ports2
Number of handles included1 pc(s)
AC adapter output voltage48 V
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
CertificationFCC
Weight and Dimensions IconWeight and Dimensions
Depth152.4 mm
Width266.7 mm
Height203.2 mm
Weight1600 g

Related product manuals