Cisco 8821

Charge the Battery with the AC Power Supply
You can charge your phone using an AC power supply. When you use the power supply to charge your phone,
the battery can take up to 3 hours to fully charge.
The wide connector on the USB cable connects to the phone using magnets to hold it secure. It has pins that
you need to align correctly. If you hold the phone so that the screen is towards you, the battery icon on the
connector is visible.
Do not charge the phone in a hazardous environment.
Do not charge the phone if it is wet.
Caution
Cisco Wireless IP Phone 882x Series Accessory Guide
5
Cisco Accessories
Charge the Battery with the AC Power Supply