Cisco Business Edition 4000 End User Guide
August 2018Copyright © 2018 Cisco Systems, Inc. All rights reserved.
Tasks on Phone Device
Turn On Your Phone
Press and hold Power/End Call until the red LED
lights.
Turn Off Your Phone
1. Press and hold Power/End Call for 4 seconds.
2. Press Power off.
Charge the Battery with the AC Power
Supply
1. Plug the USB cable into the bottom of the phone with
the pins aligned.
2. Plug the USB cable into the power adapter.
3. Plug the power adapter into the electrical outlet.
Lock the Phone Keypad
You can lock the keypad so that you don’t press keys by
mistake.
Press and hold Zero (0) until you see the
message that the keypad is locked.
Unlock the Phone Keypad
If you lock the keypad, you need to unlock it to use the
phone.
1. Press Unlock.
2. Press Zero (0) .
Place a Call
1. Enter a phone number.
2. Press Answer/Send .
Answer a Call
Press Answer or Answer/Send .
Make a Call with a Headset
1. Connect the headset to the headset port availbale on
the top of the phone.
2. Select a line.
3. Enter a phone number.
4. Press Answer/Send .
Make a Call with the Phone Speaker
1. Press and hold available on the right side of the
phone. The speaker mode gets activated.
2. Dial the phone number.
3. Press Answer/Send to place your call.
4. Press and hold again to turn off speaker mode.
Put a Call on Hold
1. From a connected call, press More .
2. Press Hold.
View Your Recent Calls
1. Access the Recents app.
2. Select Recents.
3. Select a line or All recents.
Mute Your Audio
1. Press Mute available on the left side of the phone.
2. Press Mute again to turn mute off.
Access Your Voicemail Service
1. Press and hold the One (1) button.
2. Follow the prompts.
Adjust the Volume During a Call
Press Volume up and down to adjust the
volume while you are on a call.
Adjust the Phone Ringer Volume
Press Volume up and down to adjust the
ringer volume when the phone rings.