Cisco 8865 Series Installation Guide

Installation Guide for Cisco IP Phone with Multiplatform Firmware
i
Installation Guide for Cisco IP Phone with Multiplatform Firmware
i
Basic Installation 1
Connect Your Cisco IP Phone 2
Connect Your Conference Phone 7832 3
Connect Your Conference Phone 8832 4
Key Expansion Module Installation 5
Install a Key Expansion Module on Your 6851 Phone 6
Install a Key Expansion Module on 8851, 8861, and 8865 Phones 7
Connect Headsets 8
Connect Cisco Headsets 521 and 522 9
Connect Cisco Headsets 561 and 562 10
Connect Cisco Headset 730 12
Wall Mount Your Phone 14
Wall Mount Your 6800 Series Phones 15
Wall Mount Your 6821 Phone 15
Wall Mount Your 6841/6851/6861/6871 Phone 16
Wall Mount Your 7800 Series Phones 18
Wall Mount Your 7811 Phone 18
Remove 7811 Phone from the Wall Mount 19
Wall Mount Your 7821 or 7841 Phone 20
Remove 7821 or 7841 Phone from the Wall Mount 22
C H A P T E R 1
C H A P T E R 2
C H A P T E R 3
C H A P T E R 4
CONTENTS

Cisco 8865 Series Specifications

General

Resolution	800 x 480 pixels
Speakerphone	Full-duplex speakerphone
Codec Support	G.711, G.722, G.729, iLBC, Opus
Audio	Wideband audio
Ethernet	10/100/1000 Mbps
USB Ports	2 USB ports
Video	720p HD video
Power	IEEE 802.3af/at Power over Ethernet (PoE)
Protocols	SIP
Headset Connector	RJ9 headset port
Security	802.1X, TLS, SRTP
Weight	1.6 kg