Cisco 8865 Series Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 5 of 30
The conversion process involves moving to a transitional firmware load before the final load is installed. The transitional load is where you
enter both the license file and a normal MPP target load to upgrade to. There are separate transitional loads for each migration direction. For
example, there is one firmware load for moving from Enterprise to MPP, and one firmware load for moving from MPP to Enterprise. Likewise,
each migration direction requires a different license file. The conversion direction is reflected inside the license file and in the firmware image
name.
Figure 1. Example MPP_2_ENT License File
Figure 2. Example ENT_2_MPP License File

Cisco 8865 Series Specifications

General

Resolution	800 x 480 pixels
Speakerphone	Full-duplex speakerphone
Codec Support	G.711, G.722, G.729, iLBC, Opus
Audio	Wideband audio
Ethernet	10/100/1000 Mbps
USB Ports	2 USB ports
Video	720p HD video
Power	IEEE 802.3af/at Power over Ethernet (PoE)
Protocols	SIP
Headset Connector	RJ9 headset port
Security	802.1X, TLS, SRTP
Weight	1.6 kg