Cisco 8865 Series Manual

Answer a Call:
Procedure
When your phone rings, press the flashing line button to answer the call.
Answer Call Waiting:
When you are on an active call, you know that a call is waiting when you hear a single beep and
see the line button flash.
Procedure
Step 1
Press the line button.
Step 2
(Optional) If you have more than one call waiting, select an incoming call.
Mute Your Call:
While you are on a call, you can mute the audio, so that you can hear the other person, but
they cannot hear you.
If you have a video phone, when you mute your audio, your camera continues to transmit
video.
Procedure
Step 1
Press Mute .
Step 2
Press Mute again to turn mute off.

Cisco 8865 Series Specifications

General

Resolution	800 x 480 pixels
Speakerphone	Full-duplex speakerphone
Codec Support	G.711, G.722, G.729, iLBC, Opus
Audio	Wideband audio
Ethernet	10/100/1000 Mbps
USB Ports	2 USB ports
Video	720p HD video
Power	IEEE 802.3af/at Power over Ethernet (PoE)
Protocols	SIP
Headset Connector	RJ9 headset port
Security	802.1X, TLS, SRTP
Weight	1.6 kg