Cisco 890 Series User Manual

Contents
4
Cisco Integrated Services Router Hardware Installation Guide
Preventing Damage to the Router 3-11
Connecting a PC, Server, or Workstation 3-12
Connecting a Phone 3-13
Connecting an External Ethernet Switch 3-14
Connecting the V.92 modem Port 3-15
Connecting a Terminal or PC to the Console Port 3-16
Terminal Emulator Settings 3-16
Connecting a Modem to the Auxiliary Port 3-17
Connecting the 3G Card 3-18
Installing the 3G Adapter for Extended Cable/Antenna 3-24
Connecting a Data BRI Port 3-28
Connecting an FE Line to an FE WAN Port 3-30
Connecting a GE Line to an GE WAN Port 3-31
Connecting an xDSL Line 3-31
Connecting Power over Ethernet 3-34
Connecting the AC Adapter 3-35
Connecting an FXS Line 3-39
Connecting an FXO Line 3-40
Connecting a Voice ISDN BRI Line 3-42
Verifying Connections 3-45
Initial Configuration 4-1
Cisco 810 Series 4-1
Cisco 819 Series 4-1
Cisco IOS CLI 4-1
Setup Command Facility 4-1
Verifying the Initial Configuration 4-2
Cisco 860, 880, 890 Series 4-2
Cisco Configuration Professional Express 4-2
Cisco IOS CLI 4-2
Setup Command Facility 4-4
Verifying the Initial Configuration 4-6
Initial Configuration of the Wireless Access Point 4-7
Technical Specifications A-1
Cisco 810 Series A-1
Cisco 812 Series A-1
Router Specifications A-1
Mean Time Between Failure Ground Benign Environment A-4
Cisco 819 Series A-4

Cisco 890 Series Specifications

General

Product Type	Router
Form Factor	Desktop
USB Ports	1 x USB 2.0
Firewall	Yes
VPN Support	Yes
RAM	256 MB
Wireless	802.11n
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	10 to 85% non-condensing
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network / Transport Protocol	TCP/IP
Routing Protocol	OSPF, BGP, RIP-1, RIP-2, EIGRP, HSRP, VRRP
Remote Management Protocol	SNMP, Telnet, HTTP, HTTPS, SSH
Features	VPN support, firewall protection, Quality of Service (QoS), VLAN support
Encryption Algorithm	AES, 3DES, DES