Cisco 890 Series User Manual

vii
Cisco Integrated Services Router Hardware Installation Guide
Preface
This preface describes the objectives, audience, organization, and conventions of this guide and
describes related documents that have additional information. It contains the following sections:
• Objective, page vii
• Audience, page vii
• Organization, page viii
• Conventions, page viii
• Related Documentation, page xvi
• Searching Cisco Documents, page xvi
• Obtaining Documentation and Submitting a Service Request, page xvi
Objective
This guide provides an overview and explains how to install, connect, and perform initial configuration
for the following series:
• Cisco 810 series ISRs that include both Cisco 812 series and 819 series ISRs
• Wireless and non-wireless Cisco 860 series, Cisco 880 series, and Cisco 890 Integrated Services
Routers (ISRs)
Audience
This guide is intended for Cisco equipment providers who are technically knowledgeable and familiar
with Cisco routers and Cisco IOS software and features.

Cisco 890 Series Specifications

General

Product Type	Router
Form Factor	Desktop
USB Ports	1 x USB 2.0
Firewall	Yes
VPN Support	Yes
RAM	256 MB
Wireless	802.11n
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	10 to 85% non-condensing
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network / Transport Protocol	TCP/IP
Routing Protocol	OSPF, BGP, RIP-1, RIP-2, EIGRP, HSRP, VRRP
Remote Management Protocol	SNMP, Telnet, HTTP, HTTPS, SSH
Features	VPN support, firewall protection, Quality of Service (QoS), VLAN support
Encryption Algorithm	AES, 3DES, DES