Cisco AS5350 - Universal Access Server - Page 122

5-24
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
Chapter5 Managing and Troubleshooting the UniversalPort Card
Interface Queue Wedge Monitor
Async4/01 00:23:26
Async4/02 00:23:21
Async4/03 00:23:15
FastEthernet0/0 00:24:35
FastEthernet0/1 00:24:50
Virtual-Access2 00:38:19
Virtual-Access3 00:38:19
AS5400##
Step 3 Show interface wedge process running.
AS5400##show proc cpu | i Intf
39 0 341 0 0.00% 0.00% 0.00% 0 Intf Wedge Monit
AS5400##
Step 4 Disable interface monitor.
AS5400##conf t
Enter configuration commands, one per line. End with CNTL/Z.
AS5400#(config)#no interface-monitor enable
AS5400#(config)#^Z
AS5400##
AS5400##
Step 5 Show interface wedge process running again. (No process is running now.)
AS5400##show proc cpu | i Intf
AS5400##
Step 6 Show wedged interface output. (No output.)
AS5400##show wedged-interfaces output
Interface Name Time Since Wedge
AS5400##
AS5400##
Step 7 Enable the Interface Queue Wedge Monitor again.
AS5400##conf t
Enter configuration commands, one per line. End with CNTL/Z.
AS5400#(config)#interface-monitor enable
AS5400#(config)#^Z
AS5400##
00:39:03: %HHM-3-INTFWEDGE: Async4/00 Output Queue Wedged
00:39:04: %SYS-5-CONFIG_I: Configured from console by console
00:39:06: %HHM-3-INTFWEDGE: Async4/01 Output Queue Wedged
00:39:09: %HHM-3-INTFWEDGE: Async4/02 Output Queue Wedged
00:39:12: %HHM-3-INTFWEDGE: Async4/03 Output Queue Wedged
00:39:15: %HHM-3-INTFWEDGE: FastEthernet0/0 Output Queue Wedged
00:39:18: %HHM-3-INTFWEDGE: FastEthernet0/1 Output Queue Wedged
00:39:39: %HHM-3-INTFWEDGE: Virtual-Access2 Output Queue Wedged
00:39:42: %HHM-3-INTFWEDGE: Virtual-Access3 Output Queue Wedged
AS5400##
AS5400##
AS5400##
Step 8 Show wedge output.
AS5400##sh wedge out
Interface Name Time Since Wedge
Async4/00 00:25:26
Async4/01 00:25:20
Async4/02 00:25:15
Async4/03 00:25:08